Avlex PS518 Gooseneck Microphone Desk Stand Manuel d'utilisateur télécharger pdf (Page 4)

4. Toggle / Power Up OFF (Muted): As soon as phantom power is applied to the PS518 base, the

microphone is muted. Momentarily pressing the soft touch button will turn the microphone on.

Momentarily pressing the soft touch button again will mute the microphone. This operation will

repeat indefinitely.

The base is supplied with a rugged three conductor, 32.8 foot (10 meters) cable terminated with a

professional 3 pin male XLR type connector for balanced audio. This cable is led out from

the bottom originally but can be changed to lead out from the back if preferred. Open the

plastic panel on the bottom; the 4-pin connector will be visible. Unscrew the screw to

release the cable and remove the cable. Open the plastic panel on the back and insert the cable into

the hole in the middle and fix the 3 conductors of the microphone cable to the 4-pin connector as

shown below. The pin assignment is as follows:

1.) XLR pin 1 shield cable to position marked no. 1 on pcb

2.) XLR pin 2 red cable to position no. 2 (positive)

on pcb

3.) XLR pin 3 white cable to position no. 3(negative)

on pcb

4.) The no. 4 is disconnected.

POWE R UP OFF

POWE R UP ON

1 2 3 4 5 6 7 8

Pas de commentaire

Avlex PS518 Gooseneck Microphone Desk Stand Manuel d'utilisateur Page 4